Remote Joystick Pairing Guide

（Perform this operation in the robot） The latest robotic systems now come with built-in remote control pairing software, and there are two methods to quickly pair the remote control.

Note

For older system versions, you can contact the FAE to obtain the remote control pairing software installation package.

Method One

  1. sudo dpkg -i crsf_deb.deb (If it is already included or installed, please skip this step.)

  2. Execute the command crsf-app -bind, you can observe the return：

f9 3. After powering on the remote control, push the button on the right side to the left to enter the interface, then press the buttons in sequence to go to Tools -> ExpressLRS -> bind mode for pairing the receiver. controller2 controller3 4. Pairing completed, return “pair success” controller4

Method Two

  1. First, you need a dual-headed Type-C data cable, like this: f11

  2. Connect the data cable to the EXT port on the robot and the data port on the remote control, like this: f12 f13

Note

The robot and the controller must be powered on.

  1. The remote control will display the Select mode interface, and select the third option USB Serial. f14 4.Wait patiently for the pairing. If the pairing is successful, the robot’s battery information will be displayed in the upper right corner of the remote control interface. f14